Sunamp Thermino 300 xPlus
xPlus
Log in or register for trade discounts!
Quantity:BUY!
Thermino xPlus - Designed to produce domestic hot water and is heated indirectly by an ASHP, Solar PV, a Boiler, and backup Grid Electricity. This compatibility is now enabled by the Optimino Key's. When combined with a charge timer and a variable electricity tariff, the Thermino xPlus range allows for low cost indirect water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.
The Thermino 300 xPlus would typically be installed in a 3-4 bedroom property as a rule of thumb.
Note, the Sunamp is very heavy:
- Tilting it beyond 45 degrees may damage the unit and void your warranty.
- Standard delivery is only to curbside, if you believe you may need assistance moving this into your property, especially upstairs, please contact about a tailored delivery service we can provide for Sunamps.
If installing with PV and an EDDI, please also fit the EDDI Relay and Sensor Board.
Sunamp Thermino xPlus Compatibility:
General Specifications
Product code
DRP-KNW-AVZ-1
DHW capacity
256L
DHW available at 40°C
333L
Weight in use
233kg
Height
1050mm
Width
365mm
Depth
575mm
Storage core warranty
10 years
Other parts warranty
2 years
Technical Specifications
Standing heat loss
35W
Energy efficiency rating
A+
Recommended flow rate
25 L/min
Minimum supply pressure
1.5 bar
Maximum working pressure
5 bar
Power inputs:
Grid electricity
Solar Panels
Boiler
Heat Pump
Need a different combination? See other Sunamp options here.
Reset Cart
