Console

The Renusol ConSole buckets area ballasted solution for installing PV modules on flat roofs or the ground.

The ConSole+ provides an angle of 15 degrees and can be fitted to flat roofs with a pitch of up to 5 degrees. Most commercially available framed standard PV modules fit on the ConSole.

The ConSole is weighed down with ballast. Any material can be used: gravel, paving slabs, bricks, rocks etc. The amount of ballast depends on the height and location of the building. 

Before installing please read the Renusol Notes and use the Renusol PV Configurator to design your array and specify the ballast.

Mounting components are included for framed PV-modules. The modules attach to the mounts using the mounting holes on the back of the module. Please check the measurements below against your panel specification:

Max module length: 1550-2150 mm
Holes gap - width: 895-1014 mm
Holes gap - length: 690-1180 mm

Note: The hole gap should be given on the panel datasheet in a form similar to the picture below. 

Pack includes:
1 x ConSole+
2 x ConSole U-Profile 1035 mm
4 x Hexag screw DIN933-M6x20 A2-70
4 x Washer DIN9021-6,4-A2
4 x Self-locking hexag nut DIN985-M6-A2
4 x ConSole Clip
4 x Hexag screw DIN7504-ST5,5x25-A2-SW8

Max 80x to a pallet. 8Kg each.