Sunamp Thermino 210 ePlus
ePlus
Log in or register for trade discounts!
Quantity:BUY!
Thermino ePlus - Designed to produce domestic hot water and is heated directly by Grid Electricity or Solar PV via the Optimino ePlus Key. When combined with a charge timer and a variable electricity tariff, the Thermino ePlus range allows for low cost electric water heating. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.
Boiler
Heat Pump
The Thermino 210 ePlus would typically be installed in a 3 bedroom property as a rule of thumb.
Note, the Sunamp is very heavy: 
- Tilting it beyond 45 degrees may damage the unit and void your warranty.
- Standard delivery is only to curbside, if you believe you may need assistance moving this into your property, especially upstairs, please contact about a tailored delivery service we can provide for Sunamps.
Sunamps should be installed with these mandatory components:
- Heat battery isolation valve
- Mains cold water pressure reducing valve (PRV)
- Mains expansion relief valve (ERV)
- Expansion vessel/shock arrestor
- Hot water thermostatic mixing valve
- Water conditioner, in areas with hard water
- Auto-bypass valve, for indirect models only
- Expansion vessel (primary circuit), for indirect models only
General Specifications
Product code
SNP-KNW-AVZ-1
Equivalent energy storage
10.5kW
Equivalent hot water capacity
212L
Water available at 40°C
301L
Weight in use
178kg
Height
870mm
Width
365mm
Depth
575mm
Storage core warranty
10 years
Other parts warranty
2 years
Technical Specifications
Standing heat loss
32W
Energy efficiency rating
C
Recommended flow rate
20 LPM
Minimum supply pressure
1.5 bar
Maximum working pressure
5 bar
Annual electricity consumption
2,690kWh/annum
Power inputs:
Grid electricity
Solar Panels
Need a different combination? See other Sunamp options here.
Reset Cart
