WPE-I

The Stiebel Eltron WPE-I 15 H 230 Premium Pack contains a 15kw ground source heat pump, a 290L cylinder, and a freestanding 100L buffer along with all the equipment required for a comprehensive heat pump install. Made in Germany, Stiebel Eltron's exceptionally high quality and efficient WPE-I H Premium inverter geothermal heat pumps are neat, quiet, and reliable. The device uses the heat from the ground for heating and hot water operation providing year-round constant heat output with high flow temperatures of up to 75°C. They are a future-proof and environmentally friendly refrigerant and contain the option for integration into the home network and control via a smartphone. The Stiebel Article Number for this product is:  204404

The most up-to-date information on all Stiebel Eltron products are available at their TOOLBOX, where you can search for each component and find detailed technical information, schematics, and technical drawings.

The pack (204404) includes the following items:

• Ground source heat pump WPE-I 15 HK 230 Premium  238617
  
• 300-litre cylinder SBB 300 Trend or SBB 302 206187
• 100-litre buffer SBP 100 classic - freestanding (buffer tank) 206279
• Central heating pump WPKI-HK ME 233603
• Bronze Potable pump UP 25-60 B 056899
• 2 No. Temperature sensor PT 1000 235996
• Ground loop filling kit WPSF 233307
• Remote control FET, control accessory 234723
• Internet Service Gateway ISG web, control unit accessory 229336
• 2 No. Filter FS-WP 28 233512

WPE-I 15 HK 230 Premium :

• This ground source heat pump with output-dependent control and inverter technology is installed indoors and combined with a separate buffer and DHW cylinder.
• The heat pump can be used in modernisation projects as high flow temperatures of up to 75 °C are available all year round for room heating and DHW heating. Passive cooling is integrated.
• The integral heat pump manager enables fully automatic, weather-compensated control of the heating system. • High-efficiency circulation pumps and expansion vessels are provided for both the brine side and the heating side.
• An insulated pump assembly supplies the heat distribution system.
• Mono mode operation is possible for heating and DHW thanks to higher flow temperatures
• Inverter technology allows ideally matched heating output through the variable speed compressor
• Easy and time-saving installation, due to high level of integration and inclusion of accessories
• Buffer cylinder to separate the flows for maximum operational reliability
• Separate DHW cylinder for a high level of hot water convenience
• Integral passive cooling
• Stiebel Article Number 238617