Sunamp Thermino 210 hp-SG
hp-SG
Log in or register for trade discounts!
Quantity:BUY!
Thermino hp-SG - Designed to produce domestic hot water by using a Samsung heat pump as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.
The Thermino 210 hp-SG would typically be installed in a 3 bedroom property.
Note, the Sunamp is very heavy:
- Tilting it beyond 45 degrees may damage the unit and void your warranty.
- Standard delivery is only to curbside, if you believe you may need assistance moving this into your property, especially upstairs, please contact about a tailor delivery service we can provide for Sunamps.
General Specifications
Product code
DNP-ECW-AXZ-1
Equivalent energy storage
10.5kWh
Equivqlent hot water capacity
192L
Water available at 40°C
271L
Weight in use
187kg
Height
870mm
Width
365mm
Depth
575mm
Storage core warranty
10 years
Other parts warranty
2 years
Technical Specifications
Standing heat loss
32.1W
Energy efficiency rating
A+
Recommended flow rate
20LPM
Minimum supply pressure
1.5 bar
Maximum supply pressure
10 bar
Connected load at 230v, 50hz
2,800W
Power inputs:
Grid electricity (Secondary source)
Boiler (Optional primary source)
Heat Pump (Primary source)
Need a different combination? See other Sunamp options here.
Reset Cart
