Sunamp Thermino 150 i
i
Log in or register for trade discounts!
Quantity:BUY!
Thermino i - Designed to produce domestic hot water by using an external heating source (e.g. a boiler) as a main source of heat, this range of heat batteries has a standby heating element built in to act as a backup if the main heat source fails. It can be used as an alternative to a hot water storage tank, providing the same energy storage in a much smaller volume. The reduced size combined with the fact that the Sunamp does not need any venting allows for full flexibility in install location.
The Thermino 150 i would typically be installed in a 1-2 bedroom property.
Note, the Sunamp is very heavy:
- Tilting it beyond 45 degrees may damage the unit and void your warranty.
- Standard delivery is only to curbside, if you believe you may need assistance moving this into your property, especially upstairs, please contact about a tailor delivery service we can provide for Sunamps.
General Specifications
Product code
DKP-CBW-AVZ-1
Equivalent energy storage
7.0kWh
Equivqlent hot water capacity
142L
Water available at 40°C
185L
Weight in use
136kg
Height
640mm
Width
365mm
Depth
575mm
Storage core warranty
10 years
Other parts warranty
2 years
Technical Specifications
Standing heat loss
28.1W
Energy efficiency rating
A+
Recommended flow rate
15LPM
Minimum supply pressure
1.5 bar
Maximum supply pressure
10 bar
Connected load at 230v, 50hz
2,800W
Power inputs:
Grid electricity (Secondary Source)
Boiler (Primary Source)
Heat Pump (Some high temp)
Need a different combination? See other Sunamp options here.
Reset Cart
