SolShare 35 Basic Bundle
SolShare
Allume’s SolShare is the world’s first power division control system (PDCS). Providing functionality to supply the AC energy outputted from a solar inverter to multiple grid-connected units behind-the-meter. The SolShare opens the solar market to apartments and businesses that share a roof.
The SolShare unit is placed between the inverter and the main switchboard. Receiving one three-phase AC input from the inverter and outputting up to 15 single-phase or 5 three-phase AC outputs (or a combination of both). Outputs are wired on the load side of each unit’s meter, at the building’s common main switchboard.
Technical information can be found here
Major markets:
Benefits to you, the installer:
- Simple installation
- Ongoing revenue opportunity for you via SolCentre subscription
- Reduced fire regs complexity
- Communal hardware
- No issue with panel placement effecting flat yield
Benefits to the customer:
- Increasing SAP points and EPC ratings
- Ongoing revenue generation from SEG (not possible with individual systems)
- Data monitoring and reporting (generating ongoing revenue for you, the installer)
- Lower electricity bills and talking fuel poverty for residents
- No hardware in the flats, no DC cabling running to each flat, reduced fire regulation.
- Fully remote fault and underperformance alerts.
Installation Requirements:
- It is recommended that there are at least 2 outputs connected on each phase. Example minimum connections:
- 6 x single-phase
- 2 x three-phase
- 1 x three-phase plus 3 x single-phase - Ganged/co-located smart meters and main switches
- Cable access between SolShare unit and central main switchboard
- Installation must be carried out by a licensed electrician who has gained SolShare Installation certification
- SolShare must be kept free of dust and water ingress during installation
To learn more about the major advantages of a SolShare solar system over traditional methods and to be come certified, contact Midsummer or Allume: commercial@midsummerenergy.co.uk or uk.info@allumeenergy.com.
Electrical Specifications
Max nominal current
35 A
Voltage range
216 – 260 VAC
Voltage drop
Frequency
Overcurrent rating
Max power input:
Input Power Factor
Frequency
Overcurrent rating
Max power input:
Input Power Factor
2.8 V
50 – 60 Hz
30 kA
22 kW
1
50 – 60 Hz
30 kA
22 kW
1
General Specifications
Dimensions (HxWxD)
920x485 x270mm
Weight
38kg
Max connections per unit
15 single-phase or 5 three-phase
Protection Rating
IP56
Operating temperature
-20 to +50°C
Reset Cart
