Atmoce MI 425 Microinverter
Microinverters
Log in or register for trade discounts!
Quantity:BUY!
tell me more
The MI 425 hits the performance sweet spot for most residential and commercial installs—get the same daily yield without overspending on extra inverter capacity you may never use.
The Atmoce MI microinverters come with a 25-year warranty, 1,000,000+ hours of reliability verification, as well as IP67 protection and safety DC voltage. Its easy installation means plug-and-play cable, one-by-one flexible PV module configuration, lightweight to 1.3kg, and PLC communication without additional cables.
The Atmoce MI microinverters come with a 25-year warranty, 1,000,000+ hours of reliability verification, as well as IP67 protection and safety DC voltage. Its easy installation means plug-and-play cable, one-by-one flexible PV module configuration, lightweight to 1.3kg, and PLC communication without additional cables.
You can install the microinverters in any configuration of the panel direction (north, east, etc...). Additionally, you are free to mix and match panels in any way, including by type, brand, and rating.
A standard DC:AC ratio design in the UK market is between 1.25 and 1.40*. This maximises yields and minimises energy losses without the extra expenses that come with higher inverter capacity. This makes the MI 425 ideal for panels in the range 530-595W**. Of course, it fully supports smaller panels; there is no performance compromise in lower-power or space-limited setups.
A standard DC:AC ratio design in the UK market is between 1.25 and 1.40*. This maximises yields and minimises energy losses without the extra expenses that come with higher inverter capacity. This makes the MI 425 ideal for panels in the range 530-595W**. Of course, it fully supports smaller panels; there is no performance compromise in lower-power or space-limited setups.
All Atmoce microinverters are delivered with the following:
- Weatherproof caps, mounted to both AC and DC ports
- Disconnecting tool
- Documentation
- QC certificates
Note: You will need to supply your own AC junction box, AC cable (connecting the AC junction box and the M-Combiner), and T-shaped screws and nuts!
Note 2: The cable-end sealing caps are delivered with the Combiner!
*Planning Inspectorate. (n.d.). Response to SNTS Deadline 7 submissions in relation to scheme sizing and ‘overbadging’, from National Infrastructure Planning website.
**Wattages are rounded to the nearest multiple of 5.
AC attributes
Rated output power:
425W
Rated output current:
1.94A
Number of phases:
1
DC Attributes
Max PV power
700W
Max Input Current
Max Input Voltage
Max Input Voltage
16A
60V
60V
Start up voltage
22V
MPPT Range
16 - 60V
System
Max Efficiency
97.4%
IP Rating
IP67
Weight
1.3 kg
Dimensions
ENA system reference
ENA system reference
248 x 164 x 38.5 mm
ATMOC/16197/V2/A1
ATMOC/16197/V2/A1
Reset Cart
